Search for: All records

Mass timber solutions are becoming more and more viable for high-seismic regions while remaining sustainable, efficient, and affordable. The industry is driving innovation leading to the development of resilient hybrid steel-mass timber solutions that can minimize post-earthquake losses and downtime. A resilient six-story hybrid mass timber structure with: [i] laminated veneer lumber (LVL) beams and columns, [ii] a cross-laminated timber (CLT) selfcentering rocking wall (SCRW) in one direction, and [iii] a steel moment frame/concentric braced frame (MF/CBF) in the other direction was tested at the University of California, San Diego (UCSD) large high-performance outdoor shaketable facility. The dynamic testing included uni-, bi-, and tri-directional ground motion time histories applied at increasing intensities, including 43- and 225-year hazard levels, design earthquake (DE) level, and risk-targeted maximum considered earthquake (MCER) level per ASCE 7-16 for a location in Seattle, Washington. Four (4) design earthquakes and two (2) risk-targeted maximum considered tri-directional earthquakes were applied to the structure. Testing resulted in peak story drift ratios of 2.4% and 1.4% in the SCRW and MF/CBF directions, respectively. Even at MCER levels of shaking, the performance-based seismic design allowed for (1) the CLT-SCRW to remain essentially undamaged and (2) the MF to remain essentially elastic, providing elastic restoring forces, while the CBF provided stable and controlled hysteretic energy dissipation. After testing, residual drifts were smaller than 1.6 mm (1/16 inch) at the roof, indicating that resilient hybrid mass timber-steel structures are viable. This paper presents the specimen design and summarizes the preliminary results from the shake-table testing. 

A full-scale, six-story, mass timber building including Mass Ply Panel (MPP) self-centering rocking walls with Buckling-Restrained Boundary Elements (BRBs) was tested at the Large High-Performance Outdoor Shake Table (LHPOST6) at the University of California, San Diego (UCSD). Measured sensor and derived data included global responses, such as floor displacements and accelerations, along with local responses, such as post-tensioning (PT) forces and uplift displacements, among others. The three-dimensional shake table testing program included 23 ground motion records with intensities of shaking ranging from Service (SLE) up to Risk-Targeted Maximum Considered Earthquake (MCER) levels. Results highlighted that: [i] the drift response was near uniform along the height of the building, [ii] the acceleration response included large contributions from the higher modes, [iii] the PT rods remained elastic and had stable post-tensioning force throughout the test program, and [iv] the self-centering system resulted in negligible residual drifts. Qualitative observations from construction and testing were also cataloged to further support the feasibility of implementation in practice. By combining steel BRBs and post-tensioning rods with MPP rocking elements, the system was able to meet the enhanced seismic performance goals targeted for the project. Future work will seek to define both resilience and sustainability targets for designs incorporating multiple performance objectives.